Opent in een nieuw tabblad

Waarop letten bij het bepalen van de afmetingen van een nachtkastje voor je slaapkamer

Gepubliceerd: 2023-03-09

Nightstand dimensions should follow the finished bed and room layout. A bedside table that looks proportionate in a catalogue can still block a drawer, cover an outlet, or sit at an awkward height beside the installed mattress.

Start with the actual mattress height, usable bedside space, and storage requirements. This guide explains how to compare height, width, and depth, then turn those choices into clear specifications for a retail collection or hotel project, from quotation through sample approval.

1. Nightstand Dimensions by Bed Configuration

Begin with a tabletop close to the top of the installed mattress. A difference within approximately 5 cm, or 2 inches, is a useful initial check, followed by a practical reach test. Include the bed base, mattress, and any permanent topper when measuring.

The table below offers illustrative shortlisting ranges. Its mattress heights are example project inputs, not standard heights for those bed types. A king bed can be low, and a single bed can be high.

Bed configuration and example mattress top height Nightstand width Nightstand depth Initial tabletop height
Low platform bed; mattress top measured at 45 cm 40–55 cm / 15.7–21.7 in 35–45 cm / 13.8–17.7 in 40–50 cm / 15.7–19.7 in
Single or twin bed; mattress top measured at 60 cm 40–50 cm / 15.7–19.7 in 35–45 cm / 13.8–17.7 in 55–65 cm / 21.7–25.6 in
Double or queen bed; mattress top measured at 65 cm 50–65 cm / 19.7–25.6 in 40–50 cm / 15.7–19.7 in 60–70 cm / 23.6–27.6 in
King bed or spacious suite; mattress top measured at 70 cm 60–80 cm / 23.6–31.5 in 45–55 cm / 17.7–21.7 in 65–75 cm / 25.6–29.5 in

These are planning suggestions, not a dimensional standard, a Hoolnn stock-size list, or manufacturing tolerances. Inch conversions are rounded. Check each proposed unit against its bed, headboard, and floor plan.

For a retail range, select a few sizes around the beds your customers actually buy. Browse our bedside tables collection to compare cabinet proportions and storage arrangements before choosing the final specification.

2. Measure the Usable Bedside Space

Take measurements from the bed frame’s widest point, including projecting rails or upholstery. Mattress width alone can overstate the space available for a nightstand.

Record the width on each side separately. Wall returns, curtains, sockets, and wardrobes can make apparently symmetrical positions different. Allow space for bedding and bed-making without placing the tabletop beyond comfortable reach. Agree the final bed-to-cabinet gap in the room mock-up rather than applying one fixed gap to every design.

Depth needs an operating check. Measure the cabinet body, top overhang, and projecting handles, then add the actual drawer extension when plotting its open position. An open drawer should not hit the bed or prevent the intended route through the room.

For example, a 49 cm-deep cabinet whose drawer front moves forward by 30 cm has an illustrative open envelope of about 79 cm, before accounting for any additional handle projection. Obtain the actual drawing; cabinet depth does not tell you drawer travel.

Finally, place the specified lamp, telephone, clock, or charging device on a sample top. External cabinet dimensions do not establish usable surface area when a raised rim or large lamp base occupies part of it.

3. Shortlist Nightstands for Hotel Room Types

Hotel nightstands should be selected by room type and operator requirements. There is no single hotel bedside-table size that fits every mattress, headboard system, or service arrangement.

The following footprints are suggested procurement starting points. Select the height separately from the installed mattress and confirm all dimensions in the room mock-up.

Room configuration Initial width × depth to review Main procurement check
Compact single or twin room 40–50 × 35–45 cm Guest access, narrow wall bays, and whether a shared central unit is appropriate
Standard double or queen room 50–60 × 40–50 cm Lamp and telephone footprint, drawer access, and two-sided layout
Larger king room 60–75 × 45–50 cm Headboard bay width, outlet positions, and bedside equipment
Suite or extended-stay room 65–80 × 45–55 cm Additional storage, housekeeping access, and replacement handling

For twin rooms, decide whether furniture must accommodate beds pushed together or separated. A shared unit changes the layout and should be approved for both arrangements where required.

Review cleaning access beneath raised cabinets and behind freestanding units. Discuss finish resistance to the operator’s cleaning products and expected use. Charging modules, cable exits, and sockets need their own approved equipment specification and service access; they should not be assumed from a product photograph.

4. Compare Published Hoolnn Models Against the Brief

Use real product dimensions to test the shortlist. Hoolnn’s three-drawer wooden bedside table and oak nightstand with drawer and shelf illustrate two substantially different footprints and storage layouts.

Product reference Published dimensions L × W × H Selection consideration
HL1296 three-drawer bedside table 58 × 49 × 64 cm / approximately 22.8 × 19.3 × 25.2 in Enclosed bedside storage; compare its 64 cm top height with the installed mattress
HL625-1-80 drawer-and-shelf nightstand 80 × 50 × 71 cm / approximately 31.5 × 19.7 × 28.0 in A wider layout and taller top; confirm the available wall bay and shelf use

The current product pages list solid oak and weathered oak finish options for these models. Retain the published dimension order in the enquiry, then request a drawing that clearly labels front width, front-to-back depth, and finished height.

The 80 cm model should not be treated as a compact alternative to the 58 cm model. A wider top can serve a larger equipment brief, but needs more room and changes the collection’s visual balance.

Confirm any size modification, hardware selection, and intended hotel application separately. A model’s appearance and published dimensions do not establish a project-specific performance approval.

Three-drawer wooden nightstand with bamboo-style corner posts and round knobs on white background

5. Choose Drawer and Construction Options

Storage layout affects the usable interior, operating space, cost, and maintenance. Agree what each nightstand must hold before choosing a drawer count.

Storage or construction option Buyer advantage Details to approve
Multiple enclosed drawers Separate storage for personal items Clear internal dimensions, runner type, opening travel, stops, and agreed load
One drawer with open shelf Enclosed essentials plus accessible lower storage Shelf opening, shelf support, cleaning access, and drawer clearance
Open shelf or simple bedside table Fewer moving parts and direct access Usable top area, shelf load, stability, and exposed edges
Wall-mounted cabinet Frees the floor beneath the unit Wall substrate, fixing design, installation height, load, and responsibility for installation

Do not assume soft-close runners, dovetail joints, or a particular drawer load from the word “premium.” Request the actual hardware and joint specification. A solid-wood product description should also be clarified by component, including drawer bottoms, back panels, and concealed parts.

For bulk orders, discuss runner availability and replacement access. A distinctive handle may suit the design but complicate future replacements if its fixing centres are undocumented.

Wall-mounted designs require a separate feasibility review. They are an engineering option, not an assumed mounting variation for the two freestanding Hoolnn examples above.

Wide wooden nightstand with single drawer, open lower shelf and horizontal metal handle on white background

6. Freeze the Specification Before Bulk Production

Build one specification sheet per model and room type. For paired nightstands, identify whether the design is identical on both sides or needs handed cable access, doors, or hardware positions.

Before quotation and sampling, provide:

  • Dimensions: finished width, depth, height, top overhang, and the agreed measurement method and tolerances.
  • Room interfaces: mattress height, headboard bay, skirting, outlets, lamp base, and required open-drawer space.
  • Construction and finish: material by component, hardware references, colour sample, and acceptable natural variation.
  • Order schedule: quantities per room type or SKU, left/right requirements, spare units, and delivery sequence.

Approve a functional sample with the intended bed or a dimensionally accurate mock-up. Check reach, drawers, handles, feet, rocking, cable access, and the usable top area. Record the signed drawing revision and approved finish references together.

Agree inspection criteria for dimensions, drawer operation, visible finish, assembly, and packaging before production begins. Test requirements should follow the intended use and destination market. An approved sample does not replace the need to confirm bulk consistency.

For hotel deliveries, label cartons by room type, model, and hand where applicable. Confirm packed dimensions, handling requirements, assembly instructions, and protection for projecting hardware. A wider cabinet can change carton volume and freight planning even when the design is otherwise similar.

7. Discuss Your Nightstand Collection with Hoolnn

Hoolnn offers wooden furniture and OEM/ODM services. For a wholesale or hotel nightstand enquiry, send the preferred product references, dimension schedule, room plan, quantities, finish direction, and destination market. Proposed changes should be reviewed and confirmed in the quotation and approved drawings.

Include the finished mattress height and bedside equipment list so the discussion covers functional fit as well as appearance. Discuss Your Wholesale Nightstand Specifications

Vraag een offerte aan

Contact Form

Meer berichten

Zoeken
×